The short and super lightweight enduro stem for handlebars with 35mm clamping diameter by 77designz. The unique 1 Piece construction allows for an unprecedented weight while keeping the stem durable and safe. Weight starts at 69 grams for a 35 mm long and 84 grams for the 45 mm length. Last but not least, its tested to DH standards.
Warning: Last items in stock!
Headtube: 1.1 / 8 "
Handlebar: 35 mm
Stack: 40 mm
Length: 35 mm / 45 mm
Material: AL 7075 TXXXX
Bolts: Torx 25 titanium screws
Weight: 69g (35mm length) 84g (45mm length)
Colors: Black / Grey / Natural / Orange / Gold / Red / Blue
This stem was developed and tested as a unit with our (Handlebar Carbon). Even though the 1 Piece Stem fully approved to be used with other handlebars, it is not allowed to spread it, which might make it difficult to use it with other handlebars. The minimum clamping area at the steerer is 39mm.
For our stems, we use entirely custom made titanium butted screws with a Torx 25. If you want to switch to golden or oil slick bolts, drop us a message before you place your order, and we will set you up.
We see no difference between Enduro and Downhill racing; that's why our products get tested on Downhill Level (ASTM F2043-13 / Category 5).
The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar which holds the aluminum ring in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America.